Cart

  • Cart Empty!

Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.

CCP S.P.R.L
Rue Van Eyck, 22
Bruxelles
B-1000
Belgium
''
curve_type_3_left_tcurve_type_3_right_t
Poe 10/100base-tx To 100base-fx Sc Media Converter

Poe 10/100base-tx To 100base-fx Sc Media Converter

€86,19  (+0,12)
Part Number: FTP-802
Language: UK

Product Details

Introduction

More than a Fiber Media Converter -- a Power over Ethernet Injector as well

The best data link and power sourcing solution for long reach network equipment

PLANET FTP-80x series is ideal for remote network equipment deployments, using two networking technologies:
- Media Conversion : 100Base-FX to 10/100Base-TX
- Power over Ethernet : Power Sourcing Equipment (PSE), PoE Injector
Providing both PoE and fiber-optic interfaces, the FTP-80x is ideal for service providers, campuses and public areas requiring to deploy the PoE for wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost effectively.


PoE Optimizes the Installation and Power Management of Network Devices

The IEEE 802.3af capabilities of the FTP-80x reduce installation costs for many new network productivity devices. As an IEEE 802.3af Power over Ethernet Injector, the FTP-80x provides DC 48V voltage over Ethernet cables. It allows the twisted pair cable between the FTP-80x and IEEE 802.3af compliant PD (Powered Device) or PoE Splitter (such as POE-151S-5V / 12V) to transfer data and power simultaneously.


Fiber-optic Link Capability Extends the Range of Network Deployments

The maximum distance from the PoE PSE and PD is 100 meters. To extend the deployment range of network device, the FTP-80x is integrated with fiber interface. The FTP-80x PoE Media Converters are used to convert optical Ethernet signal to electrical Ethernet signal that allows two type of segments to connect easily, efficiently and inexpensively. It can convert 10/100Base-TX signal to 100Base-FX signal and provides the diverse fiber connecting types of options to meet different network applications. By selecting models, the maximum networking distance can extend to as long as 15 kilometers and still sustain the transmission performance as high as 100Mbps. It works in high performance of Store and Forward mechanism and if also can prevent packet loss with IEEE 802.3x flow control (full-duplex). With the LFP (Link Fault Pass-through function),(LLCF / LLR) and the DIP switch design, it can immediately alarm administrators problems of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function.


Advantage of Combined PoE and Media Conversion

With the data, long reach fiber capability and PoE from one unit, the FTP-80x will reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It frees the security IP camera and wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time.

Network

Maximum data transfer rate

100 Mbit/s

Converter input interface

100BASE-FX,100Base-TX,10Base-T

Converter output interface

100Base-FX

Networking standards

IEEE 802.3,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x

Ethernet interface type

Fast Ethernet

Ethernet LAN data rates

10,100 Mbit/s

Auto MDI/MDI-X

Y

Duplex system

Full, Half

Ports & interfaces

Connectivity technology

Wired

Ethernet LAN (RJ-45) ports

1

Fiber ports quantity

1

Fiber optic connector

SC

Performance

Maximum transfer distance

2000 m

Wavelength

1310 nm

Fiber mode structure

Multi-mode

Fiber cable diameters supported (core/cladding)

50/125,62.5/125 µm

Tx power (min)

-19 dBmW

Tx power (max)

-14 dBmW

Sensitivity

-34.5 dBmW

Design

Internal

N

LED indicators

Y

Product colour

Blue

Certification

FCC, CE

Power

Input voltage

48 V

Input current

0.4 A

Output voltage

48 V

Output current

0.35 A

Power consumption (typical)

15.4 W

Power over Ethernet (PoE)

Y

External power adapter

Y

Weight & dimensions

Width

26 mm

Depth

70 mm

Height

97 mm

Weight

200 g

Operational conditions

Operating temperature (T-T)

0 - 50 °C

Operating relative humidity (H-H)

5 - 90%