Smart-UPS 6kVA 230V Rack Mount With 6 Year Warranty Package

Introduction

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Network manageable
Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Features

UPS topology

Double-conversion (Online)

Output power capacity

6 kVA

Output power

6000 W

Waveform

Sine

Input operation voltage (min)

100 V

Input operation voltage (max)

275 V

Input frequency

40 - 70 Hz

Output operation voltage (min)

220 V

Output operation voltage (max)

240 V

Output frequency regulation

50/60 Hz

Surge energy rating

480 J

Number of output phases

1

Efficiency

94.4%

Crest factor

3:1

Emergency Power Off (EPO)

Y

Noise level

55 dB

Surge protection

Y

Audible alarm(s)

Y

Auto-restart

Y

Ports & interfaces

AC outlet types

C13 coupler, C19 coupler

Power plug

Terminal

AC outlets quantity

10 AC outlet(s)

Number of output IEC jumpers

2

USB port

Y

Serial interface

Y

SmartSlot

Y

Battery

Battery technology

Sealed Lead Acid (VRLA)

Battery capacity

902 VAh

Typical backup time at full load

2.5 min

Typical backup time at half load

8.7 min

Battery life (max)

5 year(s)

Battery recharge time

1.5 h

Hot-swap battery

Y

Automatic battery test

Y

Cold start

Y

Design

Form factor

Rackmount

Rack capacity

4U

Product colour

Black

Display type

LCD

LED indicators

Status

International Protection (IP) code

IP20

Certification

REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 45 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Operating altitude

0 - 3000 m

Non-operating altitude

0 - 15000 m

Technical details

Sustainability certificates

RoHS, ENERGY STAR

Weight & dimensions

Width

432 mm

Depth

719 mm

Height

174 mm

Weight

60 kg

Package width

610 mm

Package depth

960 mm

Package height

370 mm

Package weight

67 kg

Packaging data

Rack mount kit

Y

Bracket

Y

Cables included

USB cable

Temperature sensor

Y

Quick installation guide

Y

Warranty card

Y

Software CD

Y

Logistics data

Products per pallet

6 pc(s)

Other features

Packaging content

Web/SNMP Management Card